TREE IRRIGATION EMITTER

TREE IRRIGATION EMITTER

Product Description

The dripper online, was installed the emitter on the outside of the pipe, using the puncher make a hole on the pipe, Then installed the emitter on it.  If it far from the crops, we also can installed a small pipe for it. With 4-80L/H flow rate, this kinds of products normally used for the tree irrigation. Having more long working life. The emitter is not pre-installed. So it can be installed according to the plant distance, more reasonable. 

TECHNICAL DATA SHEET

No-Drain Dripper

Product Features 

u Inner inlaid flat-emitter drip irrigation tape is an integral drip irrigation tape with flat emitters inlaid on the inner wall of the pipe/ tape and is widely applied to irrigation of greenhouses and field economic crops.

u Integration of the emitters and the pipe/tape, convenience in installation and use, low cost and low investment.

u Each of the emitters is provided with a self-filtering window to obtain good anti-clogging property.

u Turbulent flow channel design makes the irrigation uniform and has a certain pressure compensation effect; laying length of a single pipe on the flat ground can be up to 80m or more.

u Emitter spacing can be determined by user requirements.

Application Conditions

u Suitable for planting of the greenhouse crops to reduce pest and disease damages, save chemical fertilizers and pesticides and improve the economic benefits.

u Suitable for orchard irrigation to improve the yield effectively, perfect the fruit quality and control the weed growth effectively.

u Applicable to such field crops as cottons, chinese herbal medicines, watermelons, field vegetables and the like to improve the mechanical planting.

u The drip irrigation tape can be paved in a bending manner around ridges and can be operated conveniently.